PTFE Tape for Oil Fittings
ptfe tape for oil fittings 1.Ptfe Tape For Oil Fittings is used in a wide variety of applications ranging from use with standard pipe threads to use with more critical applications. Ptfe Tape For Oil Fittings is used to lubricate a wide variety of joints, making them easy to assemble for leak...
ptfe tape for oil fittings
1.Ptfe Tape For Oil Fittings is used in a wide variety of applications ranging from use with standard pipe threads to use with more critical applications.
Ptfe Tape For Oil Fittings is used to lubricate a wide variety of joints, making them easy to assemble for leak proof seals. PTFE Teflon Tape is used for all industrial applications including water, oil, gas, most chemicals, hydraulic and high pressure lines.
2.Ptfe Tape For Oil Fittings is generally white and is often used for less critical applications.
1. Use the soft-bristled brush to thoroughly clean the male and female threads to remove all previously applied anti-seize compound or tape. Use 1/4 inch wide tape on 1/8 inch, 1/4 inch, and 3/8 inch male tapered pipe threads. Use 1/2 inch wide tape on 1/2 inch and larger male tapered pipe threads.
2. Wrap the tape in the direction of the thread spiral of the male pipe thread beginning with the first thread. Tape should never extend beyond or overhang the first thread. If it overhangs, the tape could shred and get into the fluid system.
3. While keeping the edge of the tape parallel to the face of the fitting, wrap two to three revolutions of tape. The number of revolutions depends on the thickness of the PTFE tape you are using. If you are using thinner tape, you will need to apply more tape. Draw the free end around the threads tautly so that it conforms to the threads.
When you have wrapped enough tape, cut or tear off the excess tape. If the tape does not lie flat, firmly press the tape into the threads. Now tighten the male end connection into the mating female end connection until finger-tight. Then tighten the male end connection until wrench-tight.
Q:About the minimal order, is there any special terms?
A:Our MOQ is 50000pcs for 12 mm width and 30000pcs for 19mm width and 25mm width.We can make it OEM based on MOQ.If order quantity is less than MOQ,we can’t do OEM such as the logo printing.
Q: Is it safe for drinking water?
A: Yes,this product is safe to be used on drinking water lines.
Q:Is it sufficient to use on air compressor fittings?
A: Yes,it can.